Premium
The effect of poly(ethylene glycol) mixed with poly( l ‐lactic acid) on the crystallization characteristics and properties of their blends
Author(s) -
Athanasoulia IoannaGeorgia I,
Christoforidis Maximos N,
Korres Dimitrios M,
Tarantili Petroula A
Publication year - 2019
Publication title -
polymer international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.592
H-Index - 105
eISSN - 1097-0126
pISSN - 0959-8103
DOI - 10.1002/pi.5769
Subject(s) - materials science , crystallization , crystallinity , differential scanning calorimetry , ethylene glycol , nucleation , peg ratio , chemical engineering , activation energy , polymer chemistry , isothermal process , composite material , chemistry , organic chemistry , thermodynamics , physics , finance , engineering , economics
The non‐isothermal and isothermal crystallizations of extruded poly( l ‐lactic acid) (PLLA) blends with 10, 20 and 30 wt% poly(ethylene glycol) (PEG) were investigated with differential scanning calorimetry. The formation of α ‐form crystals in the blend films was verified using X‐ray diffraction and an increase in crystallinity indexes using Fourier transformation infrared spectroscopy. Crystallization and melting temperatures and crystallinity of PLLA increased with decreasing cooling rate (CR) and showed higher values for the blends. Although PLLA crystallized during both cooling and heating, after incorporation of PEG and with CR = 2 °C min −1 its crystallization was completed during cooling. Increasingly distinct with CR, a small peak appeared on the lower temperature flank of the PLLA melting curve in the blends. A three‐dimensional nucleation process with increasing contribution from nuclei growth at higher CR was verified from Avrami analysis, whereas Kissinger's method showed that the diluent effect of 10 and 20 wt% PEG in PLLA decreased the effective energy barrier. During isothermal crystallization, crystallization half‐time increased with temperature ( T ic ) for the blends, decreased with PEG content and was lower than that of pure PLLA. In addition, the Avrami rate constants were significantly higher than those of pure PLLA, at the lower T ic . Different crystal morphologies in the PLLA phase were formed, melting in a broader and slightly higher T m range than pure PLLA. The crystallization activation energy of PLLA decreased by 56% after the addition of 10 wt% PEG, increasing though with PEG content. Finally, PEG/PLLA blends presented improved flexibility and hydrophilicity. © 2019 Society of Chemical Industry