Premium
Study of oxidation after monoacrylate grafting on polyethylene
Author(s) -
Iguerb Ourida,
DemoustierChampagne Sophie,
MarchandBrynaert Jacqueline,
Daoust Daniel,
Sclavons Michel,
Devaux Jacques
Publication year - 2008
Publication title -
polymer international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.592
H-Index - 105
eISSN - 1097-0126
pISSN - 0959-8103
DOI - 10.1002/pi.2426
Subject(s) - grafting , polyethylene , materials science , acrylate , polymer chemistry , monomer , polymerization , fourier transform infrared spectroscopy , chemical engineering , polymer , composite material , engineering
BACKGROUND: The surface properties of high‐density polyethylene and linear low‐density polyethylene were modified by grafting urethane monoacrylate monomer under UV irradiation. This graft polymerization was carried out on native substrates and on substrates pre‐treated by wet oxidation, for different oxidation times. RESULTS: As the urethane monacrylate layer is crosslinked, its grafting efficiency was checked by dissolving the polyethylene substrates in hot toluene. Grafting was evidenced by Fourier transform infrared spectroscopy of the obtained residues, which showed that both the characteristic urethane acrylate (3350 cm −1 ) and polyethylene (2920, 730 and 720 cm −1 ) bands were observable for any polyethylene oxidation time. For an oxidation time longer than 10 hours, acrylate grafting was homogeneous and the grafted surface was smooth with a roughness of less than 10 nm. In addition, X‐ray photoelectron spectroscopy analysis of the residues revealed that O/C had an average value of 0.19, which is lower than the value corresponding to pure acrylate (0.42), whereas N/C had an average value of 0.068, also lower than that of pure acrylate (0.09), thus confirming the grafting. CONCLUSION: A urethane monoacrylate layer was grafted on native and oxidized polyethylene films. For highly oxidized films, the grafted surfaces are smooth and homogeneous. Copyright © 2008 Society of Chemical Industry