Premium
Elastomer‐modified epoxy/amine systems in a resin transfer moulding process
Author(s) -
NguyenThuc Boi Huyen,
Maazouz Abderrahim
Publication year - 2004
Publication title -
polymer international
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.592
H-Index - 105
eISSN - 1097-0126
pISSN - 0959-8103
DOI - 10.1002/pi.1437
Subject(s) - materials science , composite material , elastomer , epoxy , natural rubber , nitrile rubber , miscibility , glass transition , polymer
The effect of the elastomer structure on toughening highly crosslinked epoxy systems in a resin transfer moulding process (RTM) was investigated. Two kinds of elastomers containing carboxyl functionalized groups were used: (1) a reactive liquid elastomer based on carboxyl‐terminated butadiene‐acrylonitrile copolymer (CTBN), (2) a preformed core‐shell rubber (CSR). The introduction of CTBN rubber caused the modification in the glass transition temperature due to the miscibility in the epoxy matrix, whereas CSR particles did not. During cure, these elastomers affected the morphological, rheological and dielectric behaviour of epoxy/amine systems. A blend of 5% CTBN and 5% CSR exhibited a bimodal distribution of rubber particle sizes (analyzed by transmission electron microscopy) whereas scanning electron microscopy showed the glass fibre‐matrix cohesion in fracture surfaces. A semi‐empirical model was used (developed by Castro‐Macosko for describing chemorheological behaviour of epoxy/amine systems for the RTM process). The increase in viscosity and the reduction in ion conductivity were the two key parameters to monitor the cure process. The presence of rubber affected the rheological behaviour involving initial viscosity and gel point. The investigation of temperatures, pressures and ionic conductivities in various glass fibre layers was conducted to control the front flow filling and the cure reaction. The introduction of rubber modified the inflexion area of the cured rubber–epoxy blends by changing the cure rate. Copyright © 2004 Society of Chemical Industry