Premium
The effect of glass‐resin interface strength on the impact strength of fiber reinforced plastics
Author(s) -
Yeung Peter,
Broutman Lawrence J.
Publication year - 1978
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.760180203
Subject(s) - materials science , composite material , epoxy , polyester , glass fiber , delamination (geology) , izod impact strength test , shear strength (soil) , fibre reinforced plastic , charpy impact test , ultimate tensile strength , paleontology , environmental science , biology , soil water , soil science , subduction , tectonics
The effect of glass‐resin interface strength on the impact energy of glass fabric (style 181) reinforced epoxy and polyester laminates has been determined. The interface strength was altered by surface treatment of the fabrics with silane coupling agents and with a silicone fluid mold release and the interlaminar shear strength was determined as a means to evaluate the interface strength. An instrumented Charpy impact test was used on unnotehed specimens and thus both initiation and propagation energies could be determined as well as dynamic strength. It was found that the initiation energy for both polyester and epoxy laminates increased with increasing interlaminar shear strength, The propagation energy and thus the total energy for polyester laminates displays a minimum at a critical value of interlaminar shear strength (ILSS). Below this critical value, the total impact energy increases with decreasing shear strength and the dominant energy absorption mode appears to be delamination. Above the critical value, the impact energy increases with increasing values of ILSS and the fracture mode is predominantly one of fiber failure. In all cases, even with mold release applied, the shear strength of epoxy laminates was above this critical value and‐thus the total impact energy increases with Increasing values of ILSS. The maximum energy absorbed for the epoxy laminate and the polyester laminate is nearly identical. However, the maximum for the epoxy laminate occurs when the shear strength is maximized while for the polyester laminate the shear strength must be minimized. For the polyester laminate when delamination is predominant, it was found that the glass surface treatment affects the amount of delamination as opposed to the specific value of delamination fracture work.