Premium
Rubber heat engines, analyses and theory
Author(s) -
Farris Richard J.
Publication year - 1977
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.760171008
Subject(s) - elastomer , natural rubber , materials science , thermodynamic cycle , mechanical energy , heat engine , work (physics) , mechanical engineering , heat sink , thermodynamics , power (physics) , composite material , engineering , physics
It has long been known that elastomeric solids could be used as the working “fluid” in engines designed to convert heat into mechanical work. In the past rubber heat engine cycles were not given serious consideration since energy alternatives were not in demand and a majority of the scientific community is unaware of their gas‐like thermodynamic behavior. Consequently, past work has dealt with the subject primarily as a novelty or as a demonstrative proof of thermodynamic behavior. This paper provides an idealized mechanical and thermodynamic analysis of the rubber cycle and compares it to an equivalent cycle wherein a gas is the working fluid. Experimental data on a small rubber fiber engine is included which confirms the high power potential of these engines when they are designed using modern elastomeric fibers. These materials have remarkable properties and can respond rapidly to cyclic thermal disturbances. Power densities of roughly one watt/g of rubber have been attained using only a 30°C difference between the heat source and heat sink. Engine speeds well over 1000 RPM have also been attained when atmospheric pressure steam was used as the heat source. The analyses demonstrate that elastomers are ideally suited for energy conversion when only small temperature differences are available.