Premium
Design and Characterization of a New Food Packaging Material by Recycling Blends Virgin and Recovered polyethylene terephthalate
Author(s) -
Masmoudi Fatma,
Alix Sébastien,
Buet Stéphane,
Mehri Afef,
Bessadok Atef,
Jaziri Mohamed,
Ammar Emna
Publication year - 2020
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.25278
Subject(s) - polyethylene terephthalate , materials science , rheology , composite material , food packaging , extrusion , compatibility (geochemistry) , crystallinity , polyethylene , molding (decorative) , ductility (earth science) , creep , mechanical engineering , engineering
This research is dealing with plastic wastes recycling environmental problem. The objective is the polyethylene terephthalate (PET) valorization from postconsumer bottles by the optimization of the most suitable virgin and recycled PET mixture to be used as food contact packaging. Mixtures of these materials were elaborated by extrusion and injection molding using different recycled PET rates. Rheological, mechanical, and thermal analyses were achieved, and then migration tests were investigated to assess the recycled PET compatibility for food contact packaging. The rheological analysis showed a PET degradation after the mechanical recycling, with PET viscosity decrease, compared to that of the virgin material. The blends properties showed that at low deformation, mechanical properties were significantly improved by adding recycled PET. Consequently, the new material was more rigid with a crystallinity degree improvement, increasing the materials resistance that enhanced their tenacity. However, at great deformations, the PET mixed materials were deteriorated through drastic ductility losses. The mixture 30/70 recycled/virgin PET seems to be the best blend. For all the studied mixtures, the overall migrations conformed the European Standard, allowing the use of the recycled PET for packaging as an issue in circular economy principles for a sustainable development. POLYM. ENG. SCI., 60: 250–256, 2019. © 2019 Society of Plastics Engineers