Premium
Effects of nanotube modification on the dielectric behaviors and mechanical properties of multiwall carbon nanotubes/epoxy composites
Author(s) -
Guo Xiusheng,
Yu Demei,
Wu Jingshen,
Min Chao,
Guo Rongnan
Publication year - 2013
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.23277
Subject(s) - materials science , epoxy , composite material , carbon nanotube , ultimate tensile strength , composite number , dielectric , izod impact strength test , optoelectronics
Multiwall carbon nanotubes (MWNTs) were modified by three methods, namely, oxidizing the tubes and opening both ends, filling the tubes with Ag, and grafting the tubes with hexamethylene diamine. Modified MWNTs/epoxy composites were prepared by melt‐mixing epoxy resin with the tubes. Transmission electron microscope images showed that the modified MWNTs can be dispersed in the epoxy matrix homogeneously. The dielectric behaviors and mechanical properties of the composites were investigated. The dielectric and mechanical properties of the modified MWNTs/epoxy composites were considerably improved compared with those of the epoxy matrix. The tensile strengths of the Ag‐filled, opened, and grafted MWNTs composites at the same filler content of 1.1 wt% were higher by ∼30.5%, 35.6%, and 27.4%, respectively, than that of neat epoxy. The Izod notched impact strength of the grafted MWNTs/epoxy composite with filler content of 1.1 wt% was approximately four times higher than that of neat epoxy. A dielectric constant of ∼150 of the composite with 1.1 wt% Ag‐filled nanotubes was observed in the low‐frequency range, which was ∼40 times higher than that of the epoxy matrix. The proper modification of nanotubes provides a way to improve the properties of the polymer‐based composites. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers