Premium
The birefringence and anisotropic planar shrinkage of polycarbonate/organoclay injection moldings
Author(s) -
Sadeghi Soheil,
Nazockdast Hossein,
Mehranpour Milad
Publication year - 2012
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.23155
Subject(s) - materials science , shrinkage , organoclay , birefringence , polycarbonate , anisotropy , composite material , flow birefringence , planar , silicate , nanocomposite , optics , polymer , physics , computer graphics (images) , chemical engineering , computer science , engineering
The main objective of the present work was the study of the effect of organoclay on planar shrinkage anisotropy of polymeric injection‐molded products by means of a rheological technique, in conjunction with birefringence measurements, performed on polycarbonate/organoclay samples. Polarized optical microscopy at elevated temperatures revealed that the birefringence due to the ordered‐silicate layers had a negative contribution to the overall birefringence of the samples. The maximum value of the calculated‐order parameter based on these results was found to be near unity, indicating an appreciable degree of flow alignment for the silicate layers. Different states of silicate layer orientation, with some layers aligned parallel to the in‐plane direction at the skin layer or partially tilted from the planar direction at the core region, were observed through the optical analysis along the thickness direction. The anisotropic shrinkage measurements showed that organoclay reduced both in‐flow and cross‐flow shrinkages, resulting in a low extent of planar shrinkage anisotropy. This can be attributed to the flow alignment of clay particles closely parallel to the in‐plane direction. Prolonged relaxation of the flow‐induced molecular orientation combined with faster solidification were also found to play an appreciable role in the decreased shrinkage anisotropy. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers