Premium
Plasticizer migration from cross‐linked flexible PVC: Effects on tribology and hardness
Author(s) -
Ambrogi Veronica,
Brostow Witold,
Carfagna Cosimo,
Pannico Marianna,
Persico Paola
Publication year - 2012
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.22070
Subject(s) - plasticizer , materials science , vinyl chloride , composite material , thermal stability , thermogravimetric analysis , tribology , indentation hardness , polymer , vickers hardness test , chemical engineering , copolymer , microstructure , engineering
Uses of flexible poly(vinyl chloride) (PVC) are restricted by plasticizer migration affecting material properties. Moreover, the use of phthalate‐based plasticizers is being questioned worldwide because of their potential toxicity to humans and environment. Chemical modification of PVC structure is one of the most effective tools for reduction of plasticizer diffusion. In this work, a flexible dry blend based on cross‐linked PVC was obtained using a difunctional amine, namely isophoron diamine (IPDA) as the cross‐linking agent. The gel fraction was evaluated from insoluble portions obtained by means of solvent extraction; the efficiency of cross‐linking in reducing the plasticizer leaching was evaluated by migration tests. Effects of addition of IPDA on PVC thermal stability were determined by thermogravimetric analysis (TGA). The cross‐linking reaction turned out to be responsible for accelerating thermal degradation. Tribological properties of flexible uncross‐linked, cross‐linked and rigid PVC were determined. Flexible formulations were held in contact for 32 days with rigid PVC sheets. Plasticizer migration towards the interface caused an increase of dynamic friction compared to that of the reference rigid PVC.Vickers microhardness h Vickers values of rigid PVC sheets decreased due to plasticizer surface absorption. POLYM. ENG. SCI., 2012. © 2011 Society of Plastics Engineers