Premium
Microhybrids of metal powder incorporated in polymeric matrices: Friction, mechanical behavior, and microstructure
Author(s) -
Brostow Witold,
Buchman Alisa,
Buchman Eli,
OleaMejia Oscar
Publication year - 2008
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.21119
Subject(s) - materials science , composite material , ultimate tensile strength , microstructure , low density polyethylene , polymer , modulus , thermoplastic elastomer , metal , elastic modulus , scanning electron microscope , young's modulus , polyethylene , elastomer , metallurgy , copolymer
The polymers used as a matrix were low density polyethylene (LDPE) and a thermoplastic elastomer (TPE). The metal particles were Al, Ag, and Ni with micrometer diameters. The metal concentration varied from 0 to 10 wt%. Dynamic and static frictions on tetrafluoropolyethylene and stainless steel as sliding surfaces were determined and tensile tests were performed. Secondary electron and backscattered electron SEM images were taken to determine microstructures of the hybrids. Addition of metal powder to the matrix results in reduction to a minimum of the tensile elastic modulus for low metal concentrations, and increase in the modulus with further addition of metal particles. For the TPE, the tensile modulus exceeds that of the pure material. Small metal particles increase the modulus at lower concentrations than larger ones. Hardness varies with the filler concentration, similarly as tensile modulus does. Backscattered electron SEM images show uniform dispersion of the metal particles at the surfaces and in the bulk. The contrast is enhanced by large differences in atomic numbers between the fillers and the matrices. Ni microparticles in LDPE cause crack arrest seen in SEM. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers