Premium
Polylactide‐pine wood flour composites
Author(s) -
Pilla Srikanth,
Gong Shaoqin,
O'Neill Eric,
Rowell Roger M.,
Krzysik Andrzej M.
Publication year - 2008
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.20971
Subject(s) - crystallinity , materials science , composite material , ultimate tensile strength , wood flour , toughness , izod impact strength test , silane , young's modulus , scanning electron microscope
Biobased and biodegradable polylactide (PLA)‐pine wood flour (PWF) composites were investigated as a means to reduce the overall material cost and tailor the material properties. The composites were prepared using a kinetic‐mixer and an injection molding machine. The tensile modulus of the PLA‐PWF composites increased with the PWF content whereas the toughness and strain‐at‐break decreased. The tensile strength remained the same irrespective of the PWF content (up to 40%). The storage modulus also increased with the PWF content. Additionally, composites containing PWF treated with silane showed higher storage modulus than those without the silane treatment. The area integration underneath the tan δ peaks decreased with increasing PWF, indicating that the PLA‐PWF composites exhibited more elastic behavior with increasing PWF. The degree of crystallinity of the PLA‐PWF composites increased significantly with the PWF content. Furthermore, the treatment of PWF with silane had a positive effect on its nucleating ability, as treated PLA‐PWF composites showed higher crystallinity compared with their untreated counterparts. The morphology of the fracture surfaces were studied using a scanning electron microscope. Finally, a Halpin‐Tsai analytical model to predict Young's modulus of PLA‐PWF composites was presented to compare the theoretical results with that of experimental results. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers