Premium
Polylactide, nanoclay, and core–shell rubber composites
Author(s) -
Li Tongnian,
Turng LihSheng,
Gong Shaoqin,
Erlacher Kurt
Publication year - 2006
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.20629
Subject(s) - materials science , composite material , ultimate tensile strength , natural rubber , izod impact strength test , montmorillonite , composite number , core (optical fiber) , modulus
Abstract Three types of composites, namely, polylactide (PLA)/nanoclay, PLA/core–shell rubber, and PLA/nanoclay/core–shell rubber, were melt compounded via a corotating twin‐screw extruder. The effects of two types of organically modified montmorillonite nanoclays (i.e., Cloisite®30B and 20A), two types of core (polybutylacrylate)–shell (polymethylmethacrylate) rubbers (i.e., Paraloid EXL2330 and EXL2314), and the combination of nanoclay and rubber on the mechanical and thermal properties of the composites were investigated. According to X‐ray diffraction and transmission electron microscopy analyses, both types of PLA/5 wt% nanoclay composites had an intercalated morphology. In comparison with pure PLA, both types of PLA/5 wt% nanoclay composites had an increased modulus, similar impact strength, slightly reduced tensile strength, and significantly reduced strain at break. On the other hand, PLA/EXL2330 composites with a rubber loading level of 10 wt% or higher had a much higher impact strength and strain at break, but a lower modulus and strength when compared with pure PLA. The simultaneous addition of 5 wt% nanoclay (Cloisite®30B) and 20 wt% EXL2330 resulted in a PLA composite with a 134% increase in impact strength, a 6% increase in strain at break, a similar modulus, and a 28% reduction in tensile strength in comparison with pure PLA. POLYM. ENG. SCI. 46:1419–1427, 2006. © 2006 Society of Plastics Engineers