Premium
Transport in a twin‐screw extruder for the processing of polymers
Author(s) -
Chiruvella Raman V.,
Jaluria Y.,
Karwe M. V.,
Sernas V.
Publication year - 1996
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.10548
Subject(s) - plastics extrusion , materials science , mechanics , shear rate , viscosity , extrusion , power law fluid , newtonian fluid , mixing (physics) , heat transfer , mechanical engineering , composite material , physics , engineering , quantum mechanics
The fluid flow and heat transfer in polymer extrusion in a twin‐screw extruder was studied numerically by using the finite volume method. In the mathematical model, the coordinate system is fixed to the screw so that it is held stationary and the barrel is moved to simplify the complicated geometry. The screw channel of a twin‐screw extruder is approximated as two regions: translation and intermeshing. The flow in the translation region is similar to that in a shallow single screw extruder and is treated by the numerical methods given in the literature. In the nip or intermeshing region, strong mixing effects are expected, along with the diffusion of energy and momentum. The full governing equations are solved in this region to determine the velocity components in all the three coordinate directions. The energy equation is coupled with the equations of motion through viscosity, since the viscosity of the polymeric, non‐Newtonian, fluids considered here is dependent upon the shear rate and temperature. There is no clear physical demarcation between the nip region and the translation region. Therefore, a domain matching was employed at an arbitrary location that was varied numerically to ensure that the results were independent of this location. The variation of pressure and bulk temperature along the helical channel of the twin‐screw extruder is obtained, along with the shear rate. An experimental investigation of the velocity profiles in the translation region of a self‐wiping twin‐screw extruder, which is often used in practical applications, was carried out using a Laser Doppler Anemometer. The numerically predicted velocity profiles are compared with those from the experiments, yielding fairly close agreement.