Premium
Cure processing modeling and cure cycle simulation of epoxy‐terminated poly(phenylene ether ketone). V: Estimation of temperature distribution during cure process
Author(s) -
Wang Qiang,
He Tianbai,
Xia Ping,
Chen Tianlu,
Huang Baotong
Publication year - 1998
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.10203
Subject(s) - materials science , epoxy , composite number , curing (chemistry) , composite material , phenylene , ether , poly(p phenylene) , polymer , organic chemistry , chemistry
Abstract A numerical method to estimate temperature distribution during the cure of epoxy‐terminated poly(phenylene ether ketone) (E‐PEK)‐based composite is suggested. The effect of the temperature distribution on the selection of cure cycle is evaluated using a suggested alternation criterion. The effect of varying heating rate and thickness on the temperature distribution, viscosity distribution and distribution of the extent of cure reaction are discussed based on the combination of the here‐established temperature distribution model and the previously established curing kinetics model and chemorheological model. It is found that, for a thin composite (< = 10mm) and low heating rate (< = 2.5K/min), the effect of temperature distribution on cure cycle and on the processing window for pressure application can be neglected. Low heating rate is of benefit to reduce the temperature gradient. The processing window for pressure application becomes narrower with increasing thicknesses of composite sheets. The validity of the temperature distribution model and the modified processing window is evaluated through the characterization of mechanical and physical properties of E‐PEK‐based composite fabricated according to different temperature distribution conditions.