Premium
Degradation behavior of poly (caprolactone)–poly(ethylene glycol) block copolymer/low–density polyethylene blends
Author(s) -
Tjong S. C.,
Bei J. Z.
Publication year - 1998
Publication title -
polymer engineering and science
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.503
H-Index - 111
eISSN - 1548-2634
pISSN - 0032-3888
DOI - 10.1002/pen.10200
Subject(s) - low density polyethylene , materials science , differential scanning calorimetry , composite material , ultimate tensile strength , polymer blend , polyethylene , compression molding , scanning electron microscope , copolymer , maleic anhydride , polymer , mold , physics , thermodynamics
Blends of poly(carprolactone)‐poly(ethylene glycol) block polymer (PCE) with low‐density polyethylene (LDPE) were prepared by extrusion followed by compression molding into thin film specimens. The morphology, thermal properties, degradation, and mechanical behavior of the blends were investigated by scanning electron microscopy (SEM), differential scanning calorimetry (DSC), water immersion, static tensile testing, and dynamic mechanical analysis (DMA). The LDPE/PCE blends were immiscible for all chemical compositions. A LDPE/PCE (75/25 wt%) blend exhibited small reductions in weight and tensile strength after immersion in a buffer solution (pH = 5.0) at 50°C for extended periods of time. However, grafting maleic anhydride onto the LDPE/PCE blends improved the compatibility between the LDPE and PCE phases. Consequently, a 75/25 wt% blend of maleated LDPE/PCE exhibited significant losses in weight and tensile strength after immersion in the buffer solution. For comparison, blends of poly(caprolactone) (PCL) with LDPE were fabricated by similar techniques. The effect of compatibilizer on the degradation of LDPE/PCE and LDPE/PCL is discussed.