Premium
Numerical and experimental evaluation of the Mode III interlaminar fracture toughness of composite materials
Author(s) -
Becht G. J.,
Gillespie J. W.
Publication year - 1989
Publication title -
polymer composites
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.577
H-Index - 82
eISSN - 1548-0569
pISSN - 0272-8397
DOI - 10.1002/pc.750100505
Subject(s) - materials science , composite material , finite element method , fracture toughness , strain energy release rate , fracture (geology) , test fixture , linear elasticity , composite number , fixture , structural engineering , mechanical engineering , computer science , engineering , programming language
The Crack Rail Shear (CRS) specimen is a proposed test method to characterize the interlaminar Mode III critical strain energy release rate ( G III c ) of continuous fiber‐reinforced composite materials. The specimen utilizes the two rail shear test fixture and contains embedded Kapton film between designated plies to provide a starter crack for subsequent fracture testing. Analytical expressions for specimen compliance and G III are based upon Strength of Materials (SM) principles. The model identifies important material and geometric parameters and provides a simple data reduction scheme. A quasi‐three‐dimensional, linear elastic finite element stress analysis verifies the purity of the Mode III fracture state and identifies admissible crack lengths to be used in the experimental study. A fully three‐dimensional linear elastic finite element analysis of the CRS is employed to investigate the influence of edge effects on the fracture state for the finite length sample. Results based upon a uniform crack extension indicate a small region of mixed mode behavior at traction free edges which decay to a pure Model III fracture state in the interior of the sample. Furthermore, the G III distribution along the crack front decreases at the free edges from a maximum plateau region in the interior. The three‐dimensional analysis allows edge effects to be minimized by selecting appropriate specimen lengths. Compliance and strain energy release rates are in good agreement with the SM model. An experimental program was performed to measure G III c of two graphite epoxy systems. G III c results for AS4/3501‐6 were found to be 1.6 times the Mode II fracture toughness, while IM7/8551‐7 exhibited equivalent Mode II and Mode III fracture toughnesses. Mode III fracture surfaces revealed microstructural deformations characteristic of Mode II fracture.