Premium
Modeling and simulation of the elastic properties of natural fiber‐reinforced thermosets
Author(s) -
Alhijazi Mohamad,
Safaei Babak,
Zeeshan Qasim,
Asmael Mohammed
Publication year - 2021
Publication title -
polymer composites
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.577
H-Index - 82
eISSN - 1548-0569
pISSN - 0272-8397
DOI - 10.1002/pc.26075
Subject(s) - materials science , composite material , epoxy , volume fraction , elastic modulus , fiber , natural fiber , representative elementary volume , modulus , finite element method , thermosetting polymer , young's modulus , shear modulus , structural engineering , microstructure , engineering
This paper presents an analysis on the elastic characteristics of luffa and palm natural fiber composites (NFC) with epoxy and ecopoxy matrixes, taking into account the impact of fiber volume fractions. Furthermore, longitudinal modulus, transverse modulus, shear modulus, and Poisson's ratio were predicted using representative volume elements (RVEs) with chopped random and unidirectional fiber arrangements. However, analytical approaches such as rule of mixture, Chamis, Halpin–Tsai, and Nielsen were considered for validating and comparing the findings of finite element analyses. Hence, it was found that increasing fiber volume fraction increased the elastic properties of palm/epoxy, palm/ecopoxy, and luffa/epoxy NFCs, but decreased that of luffa/ecopoxy NFC. Addition of palm fibers in ecopoxy and epoxy had stronger effect than luffa on enhancing the elastic properties of the final structure. However, greatest elastic characteristics observed through analytical and numerical models were obtained for ecopoxy matrix with 0.5 palm fibers. A strong agreement was observed between the results obtained from analytical approaches and RVE unidirectional model. Chamis model exhibited higher outcomes compared to the considered analytical techniques, while Halpin–Tsai model showed the least values.