Premium
Effects of carbon nanotube/polymer interfacial bonding on the long‐term creep performance of nanophased glass fiber/epoxy composites
Author(s) -
Fulmali Abhinav O.,
Sen Bhaskar,
Ray Bankim C.,
Prusty Rajesh K.
Publication year - 2020
Publication title -
polymer composites
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.577
H-Index - 82
eISSN - 1548-0569
pISSN - 0272-8397
DOI - 10.1002/pc.25381
Subject(s) - materials science , composite material , carbon nanotube , creep , flexural strength , epoxy , composite number , glass fiber , differential scanning calorimetry , glass transition , dynamic mechanical analysis , flexural modulus , polymer , physics , thermodynamics
This article is focused on prediction of the long‐term creep performance of glass fiber/epoxy (GE) composites reinforced with pristine carbon nanotube (CNT) and functionalized carbon nanotube (FCNT). 0.1 wt% of CNT and FCNT are added to GE composites to fabricate CNT‐GE and FCNT‐GE composite laminates, respectively. Flexural tests were carried out at room temperature (RT) and 120°C to assess the effect of environment temperature on the flexural properties of the aforesaid materials. FCNT‐GE showed highest improvement in flexural properties at RT followed by CNT‐GE composite and control GE composite, due to better stress transfer with strong chemical interfacial bonding. By using accelerated deformation at elevated temperature and time‐temperature superposition principle, long‐term creep behavior of GE, CNT‐GE, and FCNT‐GE composites at various reference temperatures (30°C, 60°C, 90°C, and 110°C) has been anticipated. Positive reinforcement efficiency is noted up to ~10 10.5 and ~10 12.5 years for CNT‐GE and FCNT‐GE, respectively at reference temperature of 30°C, following which it neutralized and moderately became negative. However, at higher temperature this time period is reduced abruptly due to unfavorable thermal stress generation at the CNT/polymer interface. Evaluation of thermomechanical properties were also carried out using dynamic mechanical analysis. Differential scanning calorimetry was used to investigate the variation in glass transition temperature due to CNT/FCNT addition to GE composite. Fractographic study was also carried out to know the mode of failure for CNT‐GE and FCNT‐GE composite flexural tested at room temperature.