Premium
Effects of graphite filler loading and heat treatment temperature on the properties of phenolic resin based carbon–carbon composites
Author(s) -
Ravikumar N.L.,
Kar Kamal K.,
Sathiyamoorthy Dakshinamoorthy
Publication year - 2011
Publication title -
polymer composites
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.577
H-Index - 82
eISSN - 1548-0569
pISSN - 0272-8397
DOI - 10.1002/pc.21039
Subject(s) - materials science , composite material , ultimate tensile strength , graphite , microstructure , pyrolysis , carbon fibers , toughness , filler (materials) , fracture toughness , composite number , chemical engineering , engineering
Carbon/carbon composites (C/Cs) were prepared through polymer pyrolysis using PAN based carbon fabric (Panex (R) 35) and resol type phenolic resin having 0, 10, 20, 30, and 40 wt% of graphite fillers. These precursor composites were heat treated at 600, 900, and 1200°C. The effects of filler loading on the precursor composites and their C/Cs were investigated through density, microstructure, and mechanical properties. Since, the precursor composites were prepared under similar processing conditions and technique, at any particular filler loading when the heat treatment temperature increases, the bulk density of the samples decreases. The filler addition accelerates the formation of the carbon basal planes in the matrix supported by X‐ray diffraction studies. The properties such as tensile strength and strain decrease continuously mainly due to change in the matrix structure and decrease of density, whereas, the interlaminar shear strength (ILSS) and interlaminar fracture toughness (ILFT) increase mainly because of improvement in the modulus of matrix. At any particular heat treatment temperature, depending on the filler content and matrix type, the density, tensile properties, ILSS, and ILFT of the samples show different trends. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers