Premium
Preparation and characterization of novel PES‐(SiO 2 ‐g‐PMAA) membranes with antifouling and hydrophilic properties for separation of oil‐in‐water emulsions
Author(s) -
Khodadousti Saba,
Zokaee Ashtiani Farzin,
Karimi Mohammad,
Fouladitajar Amir
Publication year - 2019
Publication title -
polymers for advanced technologies
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.61
H-Index - 90
eISSN - 1099-1581
pISSN - 1042-7147
DOI - 10.1002/pat.4651
Subject(s) - membrane , materials science , chemical engineering , surface modification , fourier transform infrared spectroscopy , permeation , thermogravimetric analysis , atom transfer radical polymerization , contact angle , nanoparticle , emulsion , polymer chemistry , polymerization , nanotechnology , polymer , composite material , chemistry , biochemistry , engineering
In the present study, modification of nanoparticles (NPs) was investigated to mitigate aggregation of SiO 2 nanoparticles and improve the polymeric membrane's performance. For this purpose, the surface of SiO 2 nanoparticles was activated with amine groups, and polymethacrylic acid (PMAA) was grafted on the surface of NPs by atom transfer radical polymerization. Modified NPs were characterized by Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) tests. Polyethersulfone (PES) membranes were fabricated with both SiO 2 and SiO 2 ‐g‐PMAA NPs via nonsolvent‐induced phase separation method. The fabricated membranes were characterized regarding their permeability, hydrophilicity, and porosity properties, and their separation efficiency was tested using the synthetic oil‐in‐water emulsion. The surface and cross‐sectional morphologies of membranes were observed by field emission scanning electron microscopy (FESEM). The experimental trials showed that modified NPs dispersed more uniformly in the structure of membranes and hydroxyl groups on the surface of NPs acted more effectively. Modification of NPs enhance the membrane performance in terms of permeate flux, hydrophilicity, and porosity. NPs modification improved the permeate flux about 46%. Oil rejection for all tested membranes was more than 98%, and modification of NPs did not reduce the rejection of membranes. The optimum concentration was obtained as 1 wt.% and 1.5 wt.% for SiO 2 and SiO 2 ‐g‐PMAA, respectively. Aggregation effect dominated at concentrations beyond the optimum values that decreased the permeate flux, consequently.