Mechanical properties of films from polymer latices

The mechanical behavior of latex films is governed by their macromolecular nature as well as by their origin from particles dispersed in an aqueous medium. When monomers of different polarity are copolymerized in emulsion copolymerization, a heterogeneous distribution of the polar groups in the latex and the film can occur, owing to the different water solubilities of the comonomers. Films from these latices in many cases show a two‐phase morphology, first, consisting of the main polymer within the particles and, second, a phase which is concentrated in the interphase between the original particles and which has a strong influence on the mechanical properties of the films. Films from latices with crosslinked particles behave like homogeneous networks in the linear viscoelastic range, i.e. at small strains. Structured networks are found when latex films are interparticularly crosslinked during or after film formation, e.g. by polar bifunctional monomers or metal salts. Tensile tests of films show that the mechanical strength of latex films develops in the last stage of film formation by interdiffusion and entaglement formation across particle boundaries.