Premium
The spinning, structure, and properties of cellulose/chitin blend filaments through HWM method
Author(s) -
He Chunju,
Ma Bomou
Publication year - 2010
Publication title -
polymers for advanced technologies
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.61
H-Index - 90
eISSN - 1099-1581
pISSN - 1042-7147
DOI - 10.1002/pat.1458
Subject(s) - chitin , materials science , viscose , cellulose , crystallinity , spinning , composite material , chemical engineering , chitosan , engineering
The aim of this paper is the preparation and characterization of cellulose/chitin blend filaments over the experimental blend ratio scope i.e., 2.89 and 6.46% (w/w) chitin content through high wet modulus (HWM) procedure. The spinnability of the invested solutions was found to vary in the following order: chitin < cellulose < 9.5:0.5 blend < 9:1 blend < 8:2 blend < 5:5 blend (9:1 means the mass ratio of cellulose to chitin, so does 9.5:0.5, 8:2, and 5:5). The cross‐section of the blend filaments is of chrysanthemum shape. It was shown through the SEM photographs that there existed grooves on the surface of filaments, which became coarse with increase in chitin content. Based on the data from X‐ray, sonic velocity, intensity, and hygroscopicity, it is concluded that the degree of crystallinity, dry and wet intensity modulus, degree of orientation, and regain rate of the filaments decreased with increase in chitin content in the experiment scope. The mechanical properties of the blend filaments are much higher than those of Crabyon fiber and normal viscose filaments, which proves that the HWM method is an efficient way of preparing cellulose/chitin blend filaments with satisfactory mechanical properties and processing property. The blend filaments prepared have an effective biostatic effect on Staphylococcus aureus , Escherchia coli , and Corinebaterium michiganence according to different testing standards. Copyright © 2009 John Wiley & Sons, Ltd.