Adaptive Orientation of Exponential Finite Elements for a Phase Field Fracture Model

One technique to describe the failure of mechanical structures is a phase field model for fracture. Phase field models for fracture consider an independent scalar field variable in addition to the mechanical displacement [1]. The phase field ansatz approximates crack surfaces as a continuous transition zone in which the phase field variable varies from a value that indicates intact material to another value that represents cracks. For a good approximation of cracks, these transition zones are required to be narrow, which leads to steep gradients in the fracture field. As a consequence, the required mesh density in a finite element simulation and thus the computational effort increases. In order to circumvent this efficiency problem, exponential shape functions were introduced in the discretization of the phase field variable, see [2]. Compared to the bilinear shape functions these special shape functions allow for a better approximation of the steep transition with less elements. Unfortunately, the exponential shape functions are not symmetric, which requires a certain orientation of elements relative to the crack surfaces. This adaptation is not uniquely determined and needs to be set up in the correct way in order to improve the approximation of smooth cracks. The issue is solved in this work by reorientating the exponential shape functions according to the nodal value of phase field gradient in a particular element. To be precise, this work discusses an adaptive algorithm that implements such a reorientation for 2d and 3d situations.