Premium
Gate elements at injection locations in numerical simulations of flow through porous media: applications to mold filling
Author(s) -
Simacek Pavel,
Advani Suresh G.
Publication year - 2004
Publication title -
international journal for numerical methods in engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.421
H-Index - 168
eISSN - 1097-0207
pISSN - 0029-5981
DOI - 10.1002/nme.1116
Subject(s) - inlet , flow (mathematics) , porous medium , finite element method , mechanics , materials science , porosity , mechanical engineering , engineering , structural engineering , composite material , physics
Mold filling in polymer and composite processing is usually modelled as a special case of Darcy flow in porous media. The flow pattern and the time necessary to fill the mold depend on the ‘gate’ locations where resin is injected into the closed mold. In composite manufacturing, these are commonly outlets of small tubes transporting resin from a reservoir and their diameters are several orders of magnitude smaller than the mold dimensions. Similar size issue is also encountered in other applications of flow through porous media, such as oil and water pumping and drilling. Traditionally, these inlets are modelled by pressure or flow rate boundary condition as applied at a node of the finite element mesh that represents the injection gate. The omission of the inlet radius in the model results in a mathematical singularity as the mesh gets refined. The computed pressure or flow field depends on the mesh size and does not converge to the accurate solution, as the finite element mesh is refined. It is possible to deal with this phenomenon by modelling the inlet geometry more accurately but this approach is inefficient, as it requires additional degrees of freedom and, above all, significantly complicates the modelling process if the inlet location is not fixed a priori . This paper presents a more efficient alternate solution. It uses special ‘gate’ elements embedded in the mesh around the injection locations. Instead of adjusting the geometrical modelling of the injection location, the adjacent elements use modified shape functions to accurately model pressure field in the neighbourhood of small radial inlet. The proper pressure field shape‐functions for ‘gate’ elements based on linear finite elements are derived. The implementation in an existing mold filling simulation and how the ‘gate elements’ are automatically selected is described. An example to demonstrate the use of ‘gate’ elements and convergence towards the accurate solution with mesh refinement is presented. Copyright © 2004 John Wiley & Sons, Ltd.