Premium
The effects of intermediate principle stress on the mechanical behavior of transversely isotropic rocks: Insights from DEM simulations
Author(s) -
Faizi Saad Ali,
Kwok Chung Yee,
Duan Kang
Publication year - 2020
Publication title -
international journal for numerical and analytical methods in geomechanics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.419
H-Index - 91
eISSN - 1096-9853
pISSN - 0363-9061
DOI - 10.1002/nag.3060
Subject(s) - anisotropy , transverse isotropy , brittleness , overburden pressure , micromechanics , isotropy , geotechnical engineering , materials science , geology , ductility (earth science) , stress (linguistics) , bed , composite material , creep , physics , optics , philosophy , composite number , linguistics
Summary The discrete element method (DEM) is used to study the response of anisotropic rocks under true triaxial testing. Numerical samples of seven different bedding orientations ( β = 0 o , 15 o , 30 o , 45 o , 60 o , 75 o , and 90 o ) are created. Six series of test simulations ( σ 3 = 0, 10, 30, 50, 70, and 100 MPa) are conducted on each sample, with five different σ 2 values, varied from σ 3 to σ 1 . The effects of anisotropy and intermediate stress on the peak strength, brittle‐ductile transition, and degree of anisotropy are subsequently explained through underlying micromechanics. Results show a “fan‐shaped” variation of the peak strength with σ 2 , displaying an ascending‐then‐descending trend. An increasing brittleness with σ 2 is observed at lower confining pressures for all, but medium anisotropy angles. For higher confining pressures, increasing ductility with σ 2 is seen for every anisotropy angle. A U‐shaped variation of peak strength with anisotropy angles is noted that flattens under high intermediate stress. Hence, for numerical models of Posidonia shale under normalized σ 2 higher than 0.76, the anisotropy effect is found to be negligible. Micromechanical analyses reveal that the stress asymmetry, suppression of weak plane action as well as the localization and coalescence of microcracks in the intact rock matrix, due to σ 2 , are the contributors towards the obtained trends. Since existing failure criteria do not weigh in these features in geotechnical assessments, this paper helps future studies by providing a deeper understanding of these effects and a comprehensive data set for the analyses of anisotropic rocks under polyaxial stress conditions.