Premium
A distinct element method numerical investigation of compaction processes in highly porous cemented granular materials
Author(s) -
Dattola G.,
Prisco C.,
Redaelli I.,
Utili S.
Publication year - 2014
Publication title -
international journal for numerical and analytical methods in geomechanics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.419
H-Index - 91
eISSN - 1096-9853
pISSN - 0363-9061
DOI - 10.1002/nag.2241
Subject(s) - porosity , compaction , void (composites) , void ratio , materials science , discrete element method , microstructure , instability , geotechnical engineering , granular material , porous medium , finite element method , mechanics , composite material , structural engineering , geology , engineering , physics
SUMMARY In this paper, the results of an oedometric numerical test campaign, performed by means of a 3D Discrete Element Code on idealised cemented granular cylindrical specimens, are illustrated. The idealised microstructure taken into account is characterised by the following: (i) rigid grains bonded to one another; (ii) a high void ratio; and (iii) two different families of voids: the micro and the macro‐voids. The compaction process developing within the specimens, as well as the localization along tabular zones of pure compressive deformation (compaction banding) that in some cases takes place, are discussed. The influence on the evolution of this peculiar strain localization process of many microstructural/numerical parameters like material porosity, macro‐void size, the constitutive relationship adopted for the bonds and the bond damage rate is analysed. Tests for different values of porosity were run. Below a certain porosity threshold value, the onset of mixed modes of localisation was detected whereas the increase in the macro‐void size is observed to favour the onset of instability. Copyright © 2014 John Wiley & Sons, Ltd.