Premium
A high DQE water‐equivalent EPID employing an array of plastic‐scintillating fibers for simultaneous imaging and dosimetry in radiotherapy
Author(s) -
Blake Samuel J.,
Cheng Zhangkai,
McNamara Aimee,
Lu Minghui,
Vial Philip,
Kuncic Zdenka
Publication year - 2018
Publication title -
medical physics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.473
H-Index - 180
eISSN - 2473-4209
pISSN - 0094-2405
DOI - 10.1002/mp.12882
Subject(s) - detective quantum efficiency , dosimetry , optical transfer function , optics , detector , image guided radiation therapy , image quality , monte carlo method , materials science , dosimeter , medical imaging , medical physics , physics , nuclear medicine , radiation , computer science , medicine , mathematics , artificial intelligence , statistics , image (mathematics)
Purpose First measurements of the imaging performance of a novel prototype water‐equivalent electronic portal imaging device ( EPID ) designed for simultaneous imaging and dose verification in radiotherapy and previously characterized by our group for dosimetry are reported. Experiments were conducted to characterize the prototype's imaging performance relative to a standard commercial EPID and Monte Carlo ( MC ) simulations were performed to quantify the impact of several detector parameters on image quality and to inform the design of a proposed next‐generation prototype. Methods The prototype EPID utilizes an array of 3 cm long plastic‐scintillating fibers in place of the metal plate/phosphor screen in standard EPID s. Using a clinical 6 MV photon beam, the prototype's modulation transfer function ( MTF ), noise power spectrum ( NPS ), and detective quantum efficiency ( DQE ) were measured and compared to measurements taken using a standard commercial EPID . A sensitivity analysis was then performed using the MC model by quantifying these metrics while varying the values of several geometrical and optical transport parameters that were unspecified by the prototype manufacturer. Finally, the MC model was used to quantify the imaging performance of a proposed next‐generation prototype incorporating 1.5 cm long fibers that is better suited for integration with clinical portal imaging and dosimetry systems. Results The prototype EPID 's zero spatial frequency DQE exceeded 3%, more than doubling that measured with the standard EPID (1.25%). This increased DQE was a consequence of using a prototype array detector with a greater equivalent thickness than the combined copper plate and phosphor screen in a standard EPID . The increased thickness of our prototype decreased spatial resolution relative to the standard EPID ; however, the prototype EPID NPS was also lower than that measured with the standard EPID across all spatial frequencies. The sensitivity analysis demonstrated that the NPS was strongly affected by the roughness of the boundaries between fiber core and cladding regions. By comparison, the MTF was most sensitive to beam divergence and the presence of air between the fiber array and underlying photodiode panel. Simulations demonstrated that by optimizing these parameters, DQE (0) > 4% may be achievable with the proposed next‐generation prototype design. Conclusions The first measurements characterizing the imaging performance of a novel water‐equivalent EPID for imaging and dosimetry in radiotherapy demonstrated a DQE (0) more than double that of a standard EPID . MC simulations further demonstrated the potential for developing a next‐generation prototype better suited for clinical translation with even higher DQE .