Premium
Characterization of photon‐counting multislit breast tomosynthesis
Author(s) -
Berggren Karl,
Cederström Björn,
Lundqvist Mats,
Fredenberg Erik
Publication year - 2018
Publication title -
medical physics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.473
H-Index - 180
eISSN - 2473-4209
pISSN - 0094-2405
DOI - 10.1002/mp.12684
Subject(s) - tomosynthesis , optics , detective quantum efficiency , detector , optical transfer function , photon counting , physics , collimated light , mammography , breast imaging , image quality , iterative reconstruction , spectral imaging , photon , nuclear medicine , laser , computer science , medicine , radiology , computer vision , breast cancer , cancer , image (mathematics)
Purpose It has been shown that breast tomosynthesis may improve sensitivity and specificity compared to two‐dimensional mammography, resulting in increased detection‐rate of cancers or lowered call‐back rates. The purpose of this study is to characterize a spectral photon‐counting multislit breast tomosynthesis system that is able to do single‐scan spectral imaging with multiple collimated x‐ray beams. The system differs in many aspects compared to conventional tomosynthesis using energy‐integrating flat‐panel detectors. Methods The investigated system was a prototype consisting of a dual‐threshold photon‐counting detector with 21 collimated line detectors scanning across the compressed breast. A review of the system is done in terms of detector, acquisition geometry, and reconstruction methods. Three reconstruction methods were used, simple back‐projection, filtered back‐projection and an iterative algebraic reconstruction technique. The image quality was evaluated by measuring the modulation transfer‐function (MTF), normalized noise‐power spectrum, detective quantum‐efficiency (DQE), and artifact spread‐function (ASF) on reconstructed spectral tomosynthesis images for a total‐energy bin (defined by a low‐energy threshold calibrated to remove electronic noise) and for a high‐energy bin (with a threshold calibrated to split the spectrum in roughly equal parts). Acquisition was performed using a 29 kVp W/Al x‐ray spectrum at a 0.24 mGy exposure. Results The difference in MTF between the two energy bins was negligible, that is, there was no energy dependence on resolution. The MTF dropped to 50% at 1.5 lp/mm to 2.3 lp/mm in the scan direction and 2.4 lp/mm to 3.3 lp/mm in the slit direction, depending on the reconstruction method. The full width at half maximum of the ASF was found to range from 13.8 mm to 18.0 mm for the different reconstruction methods. The zero‐frequency DQE of the system was found to be 0.72. The fraction of counts in the high‐energy bin was measured to be 59% of the total detected spectrum. Scantimes ranged from 4 s to 16.5 s depending on voltage and current settings. Conclusions The characterized system generates spectral tomosynthesis images with a dual‐energy photon‐counting detector. Measurements show a high DQE, enabling high image quality at a low dose, which is beneficial for low‐dose applications such as screening. The single‐scan spectral images open up for applications such as quantitative material decomposition and contrast‐enhanced tomosynthesis.