z-logo
Premium
A novel lightweight and low‐loss stripline with embedded air cavity
Author(s) -
Cong YouJi,
Chang DeJie,
Cheng HaiRong,
Li Jiang,
Wu ShaoPeng
Publication year - 2020
Publication title -
microwave and optical technology letters
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.304
H-Index - 76
eISSN - 1098-2760
pISSN - 0895-2477
DOI - 10.1002/mop.32180
Subject(s) - stripline , printed circuit board , materials science , transmission line , air gap (plumbing) , insertion loss , transmission loss , ceramic , electronic engineering , optoelectronics , electrical engineering , engineering , composite material , telecommunications
This article presents a novel structure of stripline which is made of sandwich structure composed of printed circuit board (PCB) and polymethacrylimide foam, and a loss reduction design is carried out. Compared with the traditional air stripline structure, the weight of proposed structure is reduced by more than 80% with the transmission loss slightly increases. The transmission loss of this stripline structure is significantly lower than that of PCB and low‐temperature cofired ceramic stripline structure. A section of transmission line is fabricated and measured for verification; the measured results are in good agreement with the theoretical simulation, and it shows about 0.1 dB per 100 mm of transmission loss at C band.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here