Premium
Design of dual‐band colpitts VCO by switched negative resistance shaping
Author(s) -
Chen Ying,
Mouthaan Koen
Publication year - 2011
Publication title -
microwave and optical technology letters
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.304
H-Index - 76
eISSN - 1098-2760
pISSN - 0895-2477
DOI - 10.1002/mop.26020
Subject(s) - colpitts oscillator , voltage controlled oscillator , negative resistance , inductor , electrical engineering , resonator , oscillation (cell signaling) , vackář oscillator , multi band device , optoelectronics , electronic engineering , materials science , engineering , voltage , chemistry , biochemistry , antenna (radio)
A switched negative resistance shaping technique is proposed to design a dual‐band Colpitts VCO.By making use of the Miller effect, the negative resistance of the Colpitts oscillator can be shaped with an additional switchable inductor‐capacitor (LC) resonator placed between the base and the collector of the bipolar transistor. The shaping of the negative resistance guarantees oscillation to start at only the selected resonant mode when a multimode resonator is used at the input of the Colpitts oscillator. Using the proposed technique, a dual‐band VCO is designed with center frequencies of 440 and 640 MHz. The measured continuous frequency tuning range is 15.8 and 16.3% for the lower band and the upper band, respectively. © 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett 53:1356–1360, 2011; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26020