Premium
Modified ground with 50 Ω step fed WLAN notch 2 × 2 MIMO UWB antenna
Author(s) -
Patra Pradyunma K.,
Das Manoj K.
Publication year - 2020
Publication title -
international journal of rf and microwave computer‐aided engineering
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.335
H-Index - 39
eISSN - 1099-047X
pISSN - 1096-4290
DOI - 10.1002/mmce.22025
Subject(s) - coaxial antenna , monopole antenna , antenna (radio) , antenna factor , antenna measurement , antenna rotator , antenna efficiency , ground plane , patch antenna , omnidirectional antenna , physics , acoustics , electrical engineering , engineering
In this research paper, an optimized 2 × 2 MIMO UWB antenna (antenna‐E) with half circled radiators as well as 50 Ω step fed has been introduced. The proposed UWB MIMO antenna has been evolved from recent peer published papers that provide WLAN notch (5.15‐5.85GHz), ultra wide band width (3.1‐10.6 GHz) and again a very good isolation (−20 dB) also maintained. In this paper the evolutions have been derived from antenna‐A to antenna‐E. The Ultra wide band is achieved by using step feed line, cutting a metal strip on a partial ground plane, a rectangular slot underneath the feed line of each radiator in antenna‐E. A high isolation (−20 dB) is obtained by introducing two inverted Г shaped stubs in the ground plane. Both antenna‐D and antenna‐E maintain high isolation (−20 dB). But antenna‐E performs better isolation compared to antenna‐D. The notch at WLAN band (5.15‐5.85GHz) is achieved by etching rectangular C‐shaped slot on the both the radiators. In antenna‐E two radiators are placed horizontally where as in antenna‐D two radiators placed orthogonally. It has been observed that the dimension of final outcome (antenna‐E) is reduced by 33% compared to antenna‐D without compromising the overall performance of the antenna.