z-logo
Premium
Fatigue assessment of cut edges in high strength steel – Influence of surface quality
Author(s) -
Stenberg T.,
Lindgren E.,
Barsoum Z.,
Barmicho I.
Publication year - 2017
Publication title -
materialwissenschaft und werkstofftechnik
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.285
H-Index - 38
eISSN - 1521-4052
pISSN - 0933-5137
DOI - 10.1002/mawe.201600707
Subject(s) - fatigue limit , materials science , surface roughness , residual stress , fatigue testing , surface finish , residual strength , composite material , quality (philosophy) , structural engineering , engineering , philosophy , epistemology
The influence of surface roughness on the fatigue strength in high strength steels and different cutting processes are studied. Fatigue testing is conducted on S700 and S960 material for different plate thicknesses cut in dog bone specimens using oxygen, plasma, laser and waterjet cutting. The surface roughness is measured for all specimens and residual stress measurements are carried out. Estimations of the fatigue strength are made based on the measured surface roughness and the ISO 9013:2002 standard for thermal cutting quality tolerances. The testing shows a 15–70 % increase in the fatigue strength compared to the estimation, proving a weak connection between the surface quality levels in ISO 9013:2002 and the fatigue test results. Different codes and design recommendations (IIW, EC3 and EN 13001) for fatigue strength of cut surfaces are compared with the fatigue test results which clearly shows an increased fatigue strength with enhanced quality and steel grades. However, the codes and design recommendations do not allow for any fatigue strength improvement with improved quality and increased yield strength.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here