Premium
3D Printing with Flexible Materials – Mechanical Properties and Material Fatigue
Author(s) -
Cakar Siver,
Ehrmann Andrea
Publication year - 2021
Publication title -
macromolecular symposia
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.257
H-Index - 76
eISSN - 1521-3900
pISSN - 1022-1360
DOI - 10.1002/masy.202000203
Subject(s) - 3d printing , materials science , fused deposition modeling , nozzle , polylactic acid , 3d printed , composite material , ultimate tensile strength , layer (electronics) , rapid prototyping , deposition (geology) , material properties , polymer , mechanical engineering , biomedical engineering , engineering , paleontology , sediment , biology
3D printed objects are nowadays not only used in prototyping, but also in small‐scale production down to lot‐size 1. While different 3D printing techniques can be applied for this purpose, a large amount of products is prepared by the simple and inexpensive fused deposition modeling (FDM) technique, applying a polymer which is molten, pressed through a nozzle, and deposited layer‐by‐layer on a printing bed and on the previous layers, respectively. This technology, however, has the disadvantage of often insufficient mechanical properties due to the available materials and due to the construction method, which often supports air cavities inside objects, reducing the adhesion between neighboring strands and thus the overall mechanical properties. Such problems can partly be solved by chemical after‐treatments. Here, the authors report on tensile tests and load changes of the soft FDM materials FilaFlex and PLA soft (PLA = polylactic acid) in comparison with common PLA. They also show the different inner structure of objects 3D printed from these materials and their correlation with mechanical properties and material fatigue.