Premium
Functionalization of LDPE by Melt Grafting with Glycidyl Methacrylate and Reactive Blending with Polyamide‐6
Author(s) -
Wei Qian,
Chionna Donatella,
Galoppini Elena,
Pracella Mariano
Publication year - 2003
Publication title -
macromolecular chemistry and physics
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.57
H-Index - 112
eISSN - 1521-3935
pISSN - 1022-1352
DOI - 10.1002/macp.200390081
Subject(s) - low density polyethylene , glycidyl methacrylate , materials science , polyamide , polymer chemistry , reactive extrusion , grafting , polyolefin , monomer , polyethylene , composite material , polymer , layer (electronics)
Low‐density polyethylene (LDPE) was functionalized by melt radical grafting with glycidyl methacrylate (GMA) and employed for reactive blending with polyamide‐6 (PA6). The effect of the reaction procedure on the grafting degree of LDPE‐ g ‐GMA samples (0.5–12.5 wt.‐% GMA) was analyzed as a function of the concentration of GMA monomer, radical initiator (BTP), and addition of styrene as co‐monomer. Optimized grafting conditions were obtained when the amount of the monomer is below 10 wt.‐% and that of peroxide in the range 0.2–0.4 wt.‐%. Binary blends of PA6 with LDPE‐ g ‐GMA (3.5 wt.‐% GMA) and with LDPE at various compositions (80/20, 67/33, 50/50 wt.‐%) were prepared in an internal mixer and their properties were evaluated by torque, SEM and DSC analyses. Morphological examination by SEM showed a large improvement of phase dispersion and interfacial adhesion in PA6/LDPE‐ g ‐GMA blends as compared with PA6/LDPE blends. The average diameter of dispersed polyolefin particles was about 0.4 μm for LDPE‐ g ‐GMA contents < 50 wt.‐%. A marked increase of melt viscosity was observed for the compatibilized blends depending on the concentration of grafted polyolefin, and it was accounted for by the reaction between the epoxy groups of GMA and the carboxyl/amine end‐groups of PA6. The variation of torque was thus related to the molar ratio of reactive group concentration. The analysis of crystallization and melting behavior pointed out marked differences in the phase structure of the blends due to the presence of the functionalized polyolefin. Finally, the in situ formation of a graft copolymer between LDPE‐ g ‐GMA and PA6 was investigated by means of a selective dissolution method (Molau test) and by FT‐IR and DSC analyses.SEM micrograph of fracture surface of PA6/LDPE‐ g ‐GMA 50/50 blend.