Premium
Evaluation of corrosion resistance of multipass friction stir processed AZ31 magnesium alloy
Author(s) -
Liu Dejia,
Shen Mingxue,
Tang Yanchuan,
Hu Yong,
Zhao Longzhi
Publication year - 2019
Publication title -
materials and corrosion
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.487
H-Index - 55
eISSN - 1521-4176
pISSN - 0947-5117
DOI - 10.1002/maco.201910834
Subject(s) - corrosion , materials science , friction stir processing , metallurgy , microstructure , magnesium alloy , alloy , pitting corrosion , polarization (electrochemistry) , grain size , magnesium , homogeneous , chemistry , physics , thermodynamics
Multipass friction stir processing (FSP) is an effective method to produce a homogeneous microstructure and enhance the mechanical properties of magnesium (Mg) alloys. However, few studies have concentrated on the variation of corrosion resistance of Mg alloys during multipass FSP. Electrochemical alternating current (AC) impedance, polarization behavior, hydrogen evolution, and corrosion morphology were used to investigate the effects of subsequent passes on the corrosion resistance of FSP AZ31 plates. A quasi‐in‐situ observation of the growth of corrosion products was carried out to further study the corrosion behaviors of FSP AZ31 alloy. It is found that subsequent passes could further reduce the grain size of FSP AZ31 alloy and result in an increase in the hardness compared with the first pass. Moreover, subsequent passes are beneficial to the improvement in the corrosion resistance of AZ31 alloy. Pitting corrosion occurs in FSP AZ31 plates, which has not changed after subsequent passes.