Premium
Cathodic protection of XL 52 steel under the influence of sulfate reducing bacteria
Author(s) -
Esquivel R. García,
Olivares G. Zavala,
Gayosso M. J. Hernández,
Trejo A. Gayosso
Publication year - 2011
Publication title -
materials and corrosion
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.487
H-Index - 55
eISSN - 1521-4176
pISSN - 0947-5117
DOI - 10.1002/maco.200905426
Subject(s) - alkalinity , corrosion , cathodic protection , copper , dielectric spectroscopy , electrolyte , sulfate reducing bacteria , sulfate , electrochemistry , population , chemistry , metal , metallurgy , sodium sulfate , inorganic chemistry , materials science , electrode , sodium , demography , organic chemistry , sociology
The effect of sulfate reducing bacteria (SRB) upon the cathodic protection of XL 52 steel was determined, in order to identify if the potential value of −0.950 V versus copper/copper sulfate electrode is good enough to protect the metal surface. During the experiments, different operational parameters were monitored: hydrogen sulfide production, iron concentration, electrolyte alkalinity, microorganisms' population, as well as the metal surface damage. At the same time, the corrosion rate was determined using two electrochemical techniques: polarization resistance (PR) and electrochemical impedance spectroscopy (EIS). According to the results, it was observed that the protection potential of −0.950 V versus copper/copper sulfate electrode is not enough to control the microbiologically induced corrosion. This situation is reinforced by the fact that significant iron concentration was found in the electrolyte. The microbiological activity is not affected by the protection potential. On the contrary, the population growth is slightly strengthened. The alkalinity generated by the applied potential did not stop the SRB growth. A type of localized corrosion was developed during the experiments with microorganisms, even when the protection potential was applied to the system.