Premium
Corrosion‐technical properties of high‐strength stainless steels for the application in prestressed concrete structures
Author(s) -
Wu Y.,
Nürnberger U.
Publication year - 2009
Publication title -
materials and corrosion
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.487
H-Index - 55
eISSN - 1521-4176
pISSN - 0947-5117
DOI - 10.1002/maco.200905279
Subject(s) - corrosion , materials science , austenite , prestressed concrete , metallurgy , chloride , cracking , martensite , stress corrosion cracking , intergranular corrosion , composite material , microstructure
Experience with prestressed concrete over about half a century has indicated that the corrosion resistance of conventional prestressing steel does not always satisfy, especially the prestressing steels are susceptible to chloride attack (de‐icing salts) and hydrogen (hydrogen‐induced stress corrosion cracking). On the other hand corrosion agents, such as chloride, condensation water, can penetrate in the concrete and arrive at the surface of steels. Hence, corrosion damage of prestressing steels can happen and, in the extreme cases, the prestressed concrete structure collapsed resulting from the failure of the tendon. In this paper, consideration is made to use high‐strength stainless steels as prestressing tendon with bond in concrete. The high‐strength stainless steels of qualities 1.4301 (X5CrNi18‐10), 1.4401 (X5CrNiMo17‐12‐2), 1.4436 (X3CrNiMo17‐13‐3) and 1.4439 (X3CrNiMoN17‐13‐5) with sequence of increasing austenite stability were investigated. For application in prestressing tendon with bond in concrete the cold‐drawn high‐strength stainless steel of quality 1.4401 is an optimal proposition regarding its satisfactory resistance against pitting corrosion and stress corrosion cracking (SCC) in structure‐related corrosive conditions. The lower alloyed steel 1.4301 has an insufficient resistance against the chloride‐induced corrosion because of the lack of molybdenum and the content of deformation martensite due to the strong cold‐drawing of its unstable austenitic structure.