Premium
Study of C‐S‐H dehydration due to temperature increase during fires
Author(s) -
MartínGarrido Moisés,
MartínezRamírez Sagrario,
Pérez Gloria,
Guerrero Ana M.
Publication year - 2020
Publication title -
journal of raman spectroscopy
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.748
H-Index - 110
eISSN - 1097-4555
pISSN - 0377-0486
DOI - 10.1002/jrs.5977
Subject(s) - anhydrous , raman spectroscopy , chemical composition , scanning electron microscope , porosity , calcium silicate , calcium silicate hydrate , dehydration , calcium , silicate , hydrothermal circulation , decomposition , materials science , chemical engineering , chemistry , tobermorite , hardening (computing) , spectroscopy , mineralogy , cement , metallurgy , composite material , organic chemistry , biochemistry , physics , layer (electronics) , quantum mechanics , optics , engineering
Concrete is one of the most fire‐resistant materials, whose resistance depends on the chemical and structural characteristics of the hydrated calcium silicate (C‐S‐H) formed in the hydration and hardening process. However, the structure and composition of this C‐S‐H varies with the time of hydration. The effect of the composition of the calcium silicate on the anhydrous material formed has been studied after subjecting it to an accelerated study of the effect of fire, irradiating it with a CO 2 laser. Changes in the composition of C‐S‐H can lead to changes in the mechanical properties of the cement. C‐S‐H samples with different chemical composition (Ca/Si ratios 1 and 2) as well as different synthesis processes (double decomposition and hydrothermal) were studied. The crystalline phases obtained after heating were identified through micro‐Raman spectroscopy, which confirmed the formation of anhydrous calcium silicates with the same Ca/Si ratio as the initial one. In C‐S‐H gels with a Ca/Si ratio of over 1.5, stable Ca (OH) 2 was formed. Scanning electron microscopy/energy dispersive X‐ray analysis analysis determined that in the process of heating with the laser, water is lost fast, generating porous structures. Such porosity is higher in materials with a lower Ca/Si ratio.