Premium
Confocal three‐dimensional scanning laser Raman–SERS–fluorescence microprobe. Spectral imaging and high‐resolution applications
Author(s) -
Sharonov Sergey,
Nabiev Igor,
Chourpa Igor,
Feofanov Alexey,
Valisa Paolo,
Manfait Michel
Publication year - 1994
Publication title -
journal of raman spectroscopy
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.748
H-Index - 110
eISSN - 1097-4555
pISSN - 0377-0486
DOI - 10.1002/jrs.1250250733
Subject(s) - spectrometer , optics , spectrograph , confocal , microscope , raman spectroscopy , microprobe , monochromator , spectral resolution , materials science , laser , raman microscope , resolution (logic) , photodiode , detector , spectral imaging , chemistry , wavelength , physics , spectral line , raman scattering , mineralogy , artificial intelligence , computer science , astronomy
Abstract A multi‐purpose instrument which allows the recording of confocal micro‐Raman, micro‐SERS and micro‐fluorescence spectral images of sample areas from 5 × 5 to l50 × l50 μm with a lateral resolution of ca. 0 3 μm and an axial resolution of ca. 1 μm was developed. The instrument is a combination of two spectrometers both coupled to the same microscope, motorized sample stage, confocal entrance chamber, macro‐sample chamber and CCD detector. The first spectrometer includes a double monochromator coupled with a spectrograph and exhibits the properties of a typical high‐resolution Raman instrument permitting measurements of the low‐wavenumber regions of the spectra. The second spectrometer includes a Notch filter and a spectrograph equipped with two interchangeable low‐dispersion gratings and exhibits the properties of a high‐luminosity spectrometer, suitable for low resolution, over a wide spectral range and highly sensitive micro‐Raman and microfluorescence measurements. The choice of spectrometer most suitable for a particular application can be made automatically without additional prealignment of the system. The system of optical scanners operating in the confocal mode and two‐dimensional CCD detection allow the accumulation of spectra from hundreds of points of the sample under the microscope simultaneously. A computer‐controlled scanning sample stage and a system using a ‘scanning line’ of the laser beam allow fast recording of well resolved confocal spectral images (CSI) without sample degradation. Conventional images of species could be recorded with a TV–CCD camera through the microscope optics. The software supports all stages of CSI recording and allows the combined treatment of conventional and spectral images including their spatial calibration and conversion of spectral image into a conventional image, to assign point‐by‐point the spectral data to the conventional image. The applicability of the instrumentation and techniques to the study of polymeric materials, industrial samples and fluid inclusions in minerals was demonstrated. Spectral images based on the micro‐SERS analysis of an antitumour drug adsorbed on the hydrosol were recorded and are discussed in terms of their application to the micro‐SERS imaging studies of living cells.