Premium
Estimation of the absolute shear stiffness of human lung parenchyma using 1 H spin echo, echo planar MR elastography
Author(s) -
Mariappan Yogesh K.,
Glaser Kevin J.,
Levin David L.,
Vassallo Robert,
Hubmayr Rolf D.,
Mottram Carl,
Ehman Richard L.,
McGee Kiaran P.
Publication year - 2014
Publication title -
journal of magnetic resonance imaging
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 1.563
H-Index - 160
eISSN - 1522-2586
pISSN - 1053-1807
DOI - 10.1002/jmri.24479
Subject(s) - magnetic resonance elastography , elastography , lung , parenchyma , materials science , nuclear magnetic resonance , stiffness , nuclear medicine , lung volumes , biomedical engineering , medicine , ultrasound , radiology , physics , pathology , composite material
Purpose To develop a rapid proton MR elastography (MRE) technique that can quantify the absolute shear stiffness of lung parenchyma, to investigate the ability to differentiate respiration‐dependent stiffness variations of the lung, and to demonstrate clinical feasibility. Materials and Methods A spin‐echo echo planar imaging MRE sequence (SE‐EPI MRE) with a very short echo time was developed and tested in a series of five healthy volunteers at three different lung volumes: (i) residual volume (RV), (ii) total lung capacity (TLC), (iii) and midway between RV and TLC (MID). At each volume, lung density was quantified using a MR‐based density mapping sequence. For reference, data were acquired using the previously described spin‐echo lung MRE sequence (SE‐MRE). MRE data were also acquired in a patient with proven Idiopathic Pulmonary Fibrosis (IPF) to test clinical feasibility. Results The SE‐EPIMRE sequence reduced total acquisition time by a factor of 2 compared with the SE‐MRE sequence. Lung parenchyma median shear stiffness for the 5 volunteers quantified with the SE‐EPI MRE sequence was 0.9 kPa, 1.1 kPa, and 1.6 kPa at RV, MID, and TLC, respectively. The corresponding values obtained with the SE‐MRE sequence were 0.9 kPa, 1.1 kPa, and 1.5 kPa. Absolute shear stiffness was also successfully measured in the IPF patient. Conclusion The results indicate that stiffness variations due to respiration could be measured with the SE‐EPIMRE technique and were equivalent to values generated by the previously described SE‐MRE approach. Preliminary data obtained from the patient demonstrate clinical feasibility. J. Magn. Reson. Imaging 2014;40:1230–1237 . © 2013 Wiley Periodicals, Inc .