Environmental scanning electron microscope imaging examples related to particle analysis

This work provides examples of some of the imaging capabilities of environmental scanning electron microscopy applied to easily charged samples relevant to particle analysis. Environmental SEM (also referred to as high pressure or low vacuum SEM) can address uncoated samples that are known to be difficult to image. Most of these specimens are difficult to image by conventional SEM even when coated with a conductive layer. Another area where environmental SEM is particularly applicable is for specimens not compatible with high vacuum, such as volatile specimens. Samples from which images were obtained that otherwise may not have been possible by conventional methods included fly ash particles on an oiled plastic membrane impactor substrate, a one micrometer diameter fiber mounted on the end of a wire, uranium oxide particles embedded in oil‐bearing cellulose nitrate, teflon and polycarbonate filter materials with collected air particulate matter, polystryene latex spheres on cellulosic filter paper, polystyrene latex spheres “loosely” sitting on a glass slide, and subsurface tracks in an etched nuclear track‐etch detector. Surface charging problems experienced in high vacuum SEMs are virtually eliminated in the low vacuum SEM, extending imaging capabilities to samples previously difficult to use or incompatible with conventional methods. © 1993 Wiley‐Liss, Inc.