Premium
Alkaline sulfite/anthraquinone pretreatment followed by disk refining of Pinus radiata and Pinus caribaea wood chips for biochemical ethanol production
Author(s) -
Franco Heriberto,
Ferraz André,
Milagres Adriane M. F.,
Carvalho Walter,
Freer Juanita,
Baeza Jaime,
Mendonça Regis Teixeira
Publication year - 2012
Publication title -
journal of chemical technology and biotechnology
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.64
H-Index - 117
eISSN - 1097-4660
pISSN - 0268-2575
DOI - 10.1002/jctb.2761
Subject(s) - pinus radiata , chemistry , pulp (tooth) , ethanol fuel , fermentation , softwood , lignin , anthraquinone , pulp and paper industry , hydrolysis , radiata , sulfite , cellulose , ethanol , ethanol fermentation , food science , botany , biochemistry , organic chemistry , medicine , vigna , pathology , engineering , biology
BACKGROUND: Alkaline sulfite/anthraquinone (ASA) cooking of Pinus radiata and Pinus caribaea wood chips followed by disk refining was used as a pretreatment for the production of low lignified and high fibrillated pulps. The pulps produced with different delignification degrees and refined at different energy inputs (250, 750 and 1600 Wh) were saccharified with cellulases and fermented to ethanol with Saccharomyces cerevisiae using separated hydrolysis and fermentation (SHF) or semi‐simultaneous saccharification and fermentation (SSSF) processes. RESULTS: Delignification of ASA pulps was between 25% and 50%, with low glucans losses. Pulp yield was from 70 to 78% for pulps of P. radiata and 60% for the pulp of P. caribaea . Pulps obtained after refining were evaluated in assays of enzymatic hydrolysis. Glucans‐to‐glucose conversion varied from 20 to 70%, depending on the degree of delignification and fibrillation of the pulps. The best ASA pulp of P. radiata was used in SHF and SSSF experiments of ethanol production. Such experiments produced maximum ethanol concentration of 20 g L −1 , which represented roughly 90% of glucose conversion and an estimated amount of 260 L ethanol ton −1 wood. P. caribaea pulp also presented good performance in the enzymatic hydrolysis and fermentation but, due to the low amount of cellulose present, only 140 L ethanol would be obtained from each ton of wood. CONCLUSION: ASA cooking followed by disk refining was shown to be an efficient pretreatment process, which generated a low lignified and high‐fibrillated substrate that allowed the production of ethanol from the softwoods with high conversion yields. Copyright © 2012 Society of Chemical Industry