Premium
In vitro bioactivity study of TiCaPCO(N) and Ag‐doped TiCaPCO(N) films in simulated body fluid
Author(s) -
Sukhorukova I.V.,
Sheveyko A.N.,
KiryukhantsevKorneev Ph. V.,
Levashov E.A.,
Shtansky D.V.
Publication year - 2017
Publication title -
journal of biomedical materials research part b: applied biomaterials
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.665
H-Index - 108
eISSN - 1552-4981
pISSN - 1552-4973
DOI - 10.1002/jbm.b.33534
Subject(s) - simulated body fluid , materials science , apatite , sputter deposition , surface modification , scanning electron microscope , surface roughness , chemical engineering , analytical chemistry (journal) , fourier transform infrared spectroscopy , thin film , mineralogy , sputtering , nanotechnology , chemistry , composite material , chromatography , engineering
Bioactivity of multicomponent TiCaPCO(N) and Ag‐doped TiCaPCO(N) films was evaluated in vitro using simulated body fluid (SBF) and compared with that of bioactive glass Biogran. The first group of films was fabricated by magnetron sputtering of composite TiС 0.5 –Ti 3 PO x –CaO target produced via the self‐propagating high‐temperature synthesis (SHS) method (TiCaPCON films), after which their surface was implanted with Ag + ions to obtain Ag‐doped TiCaPCON films. The second group of films was fabricated by pulsed electrospark deposition (PED) using SHS‐produced composite TiС 0.5 –Ti 3 PO x –CaO and TiС 0.5 –Ti 3 PO x –CaO–Ag electrodes. After immersion in SBF, the structure and chemistry of surface were well characterized using a combination of various microanalytical techniques, such as scanning electron microscopy, X‐ray diffractometry (both in conventional and grazing incidence mode), Fourier transform infrared spectroscopy, Raman spectroscopy, and glow discharge optical emission spectroscopy. The results showed that the surfaces of the TiCaPCO(N) and Ag‐doped TiCaPCO(N) films were bioactive in vitro and induced the formation of an apatite layer during exposure in SBF. In the case of the magnetron‐sputtered films, the apatite layer was formed over 14 days, while 28 days were needed to form CaP phase on the surface of PED‐modified samples. Various factors (film structure, surface roughness, surface functional groups, surface charge, and composition, supersaturation, and near‐surface local supersaturation of SBF) affecting the kinetics of bone‐like apatite formation on a bioactive surface are discussed. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 193–203, 2017.