Premium
Influence of substrate metal alloy type on the properties of hydroxyapatite coatings deposited using a novel ambient temperature deposition technique
Author(s) -
Barry J. N.,
Cowley A.,
McNally P. J.,
Dowling D. P.
Publication year - 2014
Publication title -
journal of biomedical materials research part a
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.849
H-Index - 150
eISSN - 1552-4965
pISSN - 1549-3296
DOI - 10.1002/jbm.a.34755
Subject(s) - materials science , deposition (geology) , alloy , substrate (aquarium) , metal , metallurgy , composite material , paleontology , oceanography , sediment , biology , geology
Hydroxyapatite (HA) coatings are applied widely to enhance the level of osteointegration onto orthopedic implants. Atmospheric plasma spray (APS) is typically used for the deposition of these coatings; however, HA crystalline changes regularly occur during this high‐thermal process. This article reports on the evaluation of a novel low‐temperature (<47°C) HA deposition technique, called CoBlast, for the application of crystalline HA coatings. To‐date, reports on the CoBlast technique have been limited to titanium alloy substrates. This study addresses the suitability of the CoBlast technique for the deposition of HA coatings on a number of alternative metal alloys utilized in the fabrication of orthopedic devices. In addition to titanium grade 5, both cobalt chromium and stainless steel 316 were investigated. In this study, HA coatings were deposited using both the CoBlast and the plasma sprayed techniques, and the resultant HA coating and substrate properties were evaluated and compared. The CoBlast‐deposited HA coatings were found to present similar surface morphologies, interfacial properties, and composition irrespective of the substrate alloy type. Coating thickness however displayed some variation with the substrate alloy, ranging from 2.0 to 3.0 μm. This perhaps is associated with the electronegativity of the metal alloys. The APS‐treated samples exhibited evidence of both coating, and significantly, substrate phase alterations for two metal alloys; titanium grade 5 and cobalt chrome. Conversely, the CoBlast‐processed samples exhibited no phase changes in the substrates after depositions. The APS alterations were attributed to the brief, but high‐intensity temperatures experienced during processing. © 2013 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 102A: 871–879, 2014.