z-logo
Premium
Improving the packing density of calcium phosphate coating on a magnesium alloy for enhanced degradation resistance
Author(s) -
Kannan M. Bobby
Publication year - 2013
Publication title -
journal of biomedical materials research part a
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.849
H-Index - 150
eISSN - 1552-4965
pISSN - 1549-3296
DOI - 10.1002/jbm.a.34423
Subject(s) - materials science , coating , dielectric spectroscopy , chemical engineering , magnesium alloy , aqueous solution , scanning electron microscope , corrosion , alloy , magnesium , composite material , electrochemistry , metallurgy , electrode , organic chemistry , chemistry , engineering
In this study, an attempt was made to improve the packing density of calcium phosphate (CaP) coating on a magnesium alloy by tailoring the coating solution for enhanced degradation resistance of the alloy for implant applications. An organic solvent, ethanol, was added to the coating solution to decrease the conductivity of the coating solution so that hydrogen bubble formation/bursting reduces during the CaP coating process. Experimental results confirmed that ethanol addition to the coating solution reduces the conductivity of the solution and also decreases the hydrogen evolution/bubble bursting. In vitro electrochemical experiments, that is, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization showed that CaP coating produced in 30% (v/v) ethanol containing coating solution (3E) exhibits significantly higher degradation resistance (i.e., ∼50% higher polarization resistance and ∼60% lower corrosion current) than the aqueous solution coating. Scanning electron microscope (SEM) analysis of the coatings revealed that the packing of 3E coating was denser than that of aqueous coating, which can be attributed to the lower hydrogen evolution in the former than in the latter. Further increase in the ethanol content in the coating solution was not beneficial; in fact, the coating produced in 70% (v/v) ethanol containing solution (7E) showed degradation resistance much inferior to that of the aqueous coating, which is due to low thickness of 7E coating. © 2012 Wiley Periodicals, Inc. J Biomed Mater Res Part A, 2013.

This content is not available in your region!

Continue researching here.

Having issues? You can contact us here