Premium
Effect of the calcium to phosphate ratio of tetracalcium phosphate on the properties of calcium phosphate bone cement
Author(s) -
Burguera Elena F.,
Guitian Francisco,
Chow Laurence C.
Publication year - 2007
Publication title -
journal of biomedical materials research part a
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.849
H-Index - 150
eISSN - 1552-4965
pISSN - 1549-3296
DOI - 10.1002/jbm.a.31478
Subject(s) - distilled water , materials science , phosphate , cement , calcium , nuclear chemistry , sodium , compressive strength , scanning electron microscope , composite material , chemistry , chromatography , organic chemistry , metallurgy
Six different tetracalcium phosphate (TTCP) products were synthesized by solid state reaction at high temperature by varying the overall calcium to phosphate ratio of the synthesis mixture. The objective was to evaluate the effect of the calcium to phosphate ratio on a TTCP‐dicalcium phosphate dihydrate (DCPD) cement. The resulting six TTCP‐DCPD cement mixtures were characterized using X‐ray diffraction analysis, scanning electron microscopy, and pH measurements. Setting times and compressive strength (CS) were also measured. Using the TTCP product with a Ca/P ratio of 2.0 resulted in low strength values (25.61 MPa) when distilled water was used as the setting liquid, even though conversion to hydroxyapatite was not prevented, as confirmed by X‐ray diffraction. The suspected CaO presence in this TTCP may have affected the cohesiveness of the cement mixture but not the cement setting reaction, however no direct evidence of CaO presence was found. Lower Ca/P ratio products yielded cements with CS values ranging from 46.7 MPa for Ca/P ratio of 1.90 to 38.32 MPa for Ca/P ratio of 1.85. When a dilute sodium phosphate solution was used as the setting liquid, CS values were 15.3% lower than those obtained with water as the setting liquid. Setting times ranged from 18 to 22 min when water was the cement liquid and from 7 to 8 min when sodium phosphate solution was used, and the calcium to phosphate ratio did not have a marked effect on this property. © 2007 Wiley Periodicals, Inc. J Biomed Mater Res, 2008