Premium
The Combined Effects of Oxygen Supply Strategy, Inoculum Size and Temperature Profile on Very‐High‐Gravity Beer Fermentation by Saccharomyces cerevisiae
Author(s) -
Jones Heather L.,
Margaritis Argyrios,
Stewart Robert J.
Publication year - 2007
Publication title -
journal of the institute of brewing
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.523
H-Index - 51
eISSN - 2050-0416
pISSN - 0046-9750
DOI - 10.1002/j.2050-0416.2007.tb00274.x
Subject(s) - fermentation , brewing , industrial fermentation , chemistry , food science , yeast , bioreactor , pulp and paper industry , biochemistry , engineering , organic chemistry
The timing and concentration of oxygen supply to wort are of particular relevance in industrial beer brewing where tank volumes exceed brewhouse capacity, thereby necessitating fermenter filling in a multiple‐brew fashion. A simple technique for accurately controlling dissolved oxygen concentration is presented to model industrial, multi‐brew fermentations at bench and pilot scales. This method was employed to identify an effective oxygen supply strategy for batch fermentations conducted with very‐high‐gravity (VHG) wort. Addition of 25 ppm dissolved oxygen to the fermenting wort, 12 h after inoculation, was the most effective oxygenation strategy and reduced fermentation time by 33% compared to the control conditions. Pilot‐scale trials were subsequently conducted to further optimize VHG batch fermentation performance through simultaneous manipulation of key fermentation process parameters, including increased yeast inoculum size, early and increased free‐rise timing and temperature, and optimized oxygenation strategy. This approach reduced the time to achieve end of fermentation targets by 34% compared to trials conducted under control conditions. The improved fermentation profile was consistent over three successive inoculations and minimal impact was observed on key flavour volatiles. Employing the optimized process for VHG batch beer production would be industrially desirable due to the potential for improved process efficiency and cost‐savings.