Premium
Nanoscale heat transfer investigation of an array of impinging jet systems with different working fluids under crossflow with and without pin fins
Author(s) -
Allauddin Usman,
Mohiuddin Rafay,
Khan Hafiz Mohammad Usman,
Uddin Naseem,
Khan Waqar A.
Publication year - 2021
Publication title -
heat transfer
Language(s) - English
Resource type - Journals
eISSN - 2688-4542
pISSN - 2688-4534
DOI - 10.1002/htj.21986
Subject(s) - nusselt number , nanofluid , turbulence , reynolds number , heat transfer , materials science , mechanics , heat transfer coefficient , jet (fluid) , fin , heat transfer enhancement , heat flux , thermodynamics , fluent , computational fluid dynamics , thermal conductivity , composite material , physics
In the current numerical study, the thermal and flow field performance of an array of confined multiple jets with air, water, and water‐Al 2 O 3 nanofluid in the maximum crossflow configuration over the target plate with and without pin fins is investigated. The numerical results are validated with the experimental data; it is found that a reasonable prediction related to heat transfer can be made. For this study, steady‐state Reynolds‐averaged Navier‐Stokes simulations with the shear‐stress transport k ‐ ω turbulence model in ANSYS Fluent were performed. The simulations are performed with volumetric concentration ϕ = 0.2 % to 3% and the jet's Reynolds number Re = 15 000 to 35 000. In all cases, the jet outlet‐to‐target plate distance Z / D is 3. It is found that the increase in values of the volumetric concentration of nanoparticles results in a decrease of the Nusselt number and an increase of the convective heat transfer coefficient. This is because there is an increase in thermal conductivity of the working fluid with the increase in the volumetric concentration of nanoparticles for the same Reynolds number. About 81.5% and 89.1% enhancement in the average heat transfer flux values is observed for flat and pin fin‐roughened target plates, respectively, for ϕ = 3 % .