Premium
Experimental analysis of the effects of porous wall on flame stability and temperature distribution in a premixed natural gas/air combustion
Author(s) -
Hashemi Seyed Abdolmehdi,
Alsulaiei Zaher Mohammed Abed,
Mollamahdi Mahdi
Publication year - 2020
Publication title -
heat transfer
Language(s) - English
Resource type - Journals
eISSN - 2688-4542
pISSN - 2688-4534
DOI - 10.1002/htj.21720
Subject(s) - materials science , porosity , combustor , porous medium , composite material , combustion , adiabatic flame temperature , silicon carbide , chemistry , organic chemistry
Abstract In the present analysis, the flame stabilization and temperature distribution within a premixed burner contain porous wall are studied experimentally. The effects of inner diameter, length, and pore density of the porous wall, thermal load, equivalence ratio, and the inlet velocity of the fuel‐air mixture on these are studied. The fuel used in this study is natural gas and the porous wall is SiC (silicon carbide) ceramic foam. The experimental results clearly indicate that the axial temperature along the porous wall increases when the inner diameter of the porous wall decreases and its length increases. The porous wall temperature with an inner diameter of 40 mm, length of 66 mm, and pore density of 30 PPI (pores per inch) has the highest temperature among the examined states. The results of studying the effect of the porous wall on flame stability show that the flame stability limit has a direct relationship with the length and pore density of porous wall and an inverse relationship with the inner diameter of the porous wall. Also, it is found that the porous wall has the highest temperature causes the maximum flame stability limit.