Premium
An experimental study of effect of pre‐existing fabric on deformation of foliated mylonite at high temperature and pressure
Author(s) -
Liu Gui,
Zhou Yongsheng,
He Changrong,
Yao Wenming,
Liu Junlai,
Zhang Yuanyuan
Publication year - 2014
Publication title -
geological journal
Language(s) - English
Resource type - Journals
SCImago Journal Rank - 0.721
H-Index - 54
eISSN - 1099-1034
pISSN - 0072-1050
DOI - 10.1002/gj.2611
Subject(s) - mylonite , quartz , electron backscatter diffraction , mineralogy , geology , overburden pressure , deformation (meteorology) , foliation (geology) , composite material , materials science , microstructure , petrology , metamorphic rock , geotechnical engineering , shear zone , paleontology , tectonics
We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10 −4 , 1 × 10 −5 and 2.5 × 10 −6 s −1 . In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.